Computer-Aided Fixture Design by Yiming (Kevin) Rong

By Yiming (Kevin) Rong

Illustrates lately built fixture layout and verification know-how, targeting their primary function in production procedures. The textual content makes use of updated laptop expertise to reduce bills, elevate productiveness and guarantee product caliber. It offers complicated info and research that's without delay acceptable to improvement of entire computer-aided modular fixture layout process

Show description

Read Online or Download Computer-Aided Fixture Design PDF

Best extraction & processing books

Asm Handbook Volume 22B: Metals Process Simulation

This instruction manual offers perception into the combination of modeling for simulation of producing processing. The metals is relocating towards an built-in computational fabrics engineering procedure (ICME). this offers engineers with actual predictions of fabric and strategy habit to prevent or decrease expensive trial-by-error and prototyping tools of improvement.

Innovative Process Development in Metallurgical Industry: Concept to Commission

This ebook describes the stages for cutting edge metallurgical technique improvement, from notion to commercialization. Key gains of the booklet include:• desire for procedure innovation• choice and optimization of procedure steps• choice of the industrial feasibility of a approach together with engineering and gear choice• choice of the environmental footprint of a method• Case-study examples of leading edge strategy improvement

Photorefractive Organic Materials and Applications

This publication offers finished, state-of-the paintings assurance of photorefractive natural compounds, a category of fabric being able to swap their index of refraction upon illumination. The swap is either dynamic and reversible. Dynamic simply because no exterior processing is needed for the index modulation to be printed, and reversible as the index swap should be transformed or suppressed through changing the illumination development.

Numerical Simulation of Heat Exchangers: Advances in Numerical Heat Transfer Volume V

This ebook offers with definite facets of fabric technology, rather with the discharge of thermal strength linked to bond breaking. It truly establishes the relationship among warmth move premiums and product caliber. The editors then sharply draw the thermal differences among a number of the different types of welding strategies, and reveal how those differences are translated into simulation version area of expertise.

Additional resources for Computer-Aided Fixture Design

Sample text

Hunt. In 1990, the introduction of an MR head showed promise of higher areal density. MR heads were capable of increasing areal density by four-fold or more as compared to inductive heads. MR heads consist of a MR reading head and a standard thin film inductive write head. MR read head produces voltage directly proportional to the flux sensed by the head. The voltage produced by MR heads is larger than inductive heads. 50 shows a schematic diagram of a representative MR head-and-slider assembly [103].

Note that the image does not correspond to the schematic, and it has more layers of copper coils. 49 (p. 56) shows a manufacturing flow chart of a thin film inductive head with a single-layer copper spiral coil. , Al2O3, copper, 81À19 Permalloy (P1), 50À50 Permalloy (P2), Sendust). Thickness of the films can vary from as low as 100 nm to as high as 15 μm. A four-inch square wafer can produce more than 10,000 thin film heads. In the given example, an Al2O3-TiC wafer was used. After mechanical polishing, a 15 μm thick Al2O3 layer was sputter deposited, which was lapped back to 10 μm thickness.

MR heads were capable of increasing areal density by four-fold or more as compared to inductive heads. MR heads consist of a MR reading head and a standard thin film inductive write head. MR read head produces voltage directly proportional to the flux sensed by the head. The voltage produced by MR heads is larger than inductive heads. 50 shows a schematic diagram of a representative MR head-and-slider assembly [103]. The slider carries the MR head. The MR read sensor in the head is a multi-layered structure deposited by one of the sputtering methods.

Download PDF sample

Rated 4.81 of 5 – based on 35 votes